Telephone Button Programming
500 Series Programs
Strata CTX Programming - Part 3: Telephone Button Programming 6/04 13-83
Telephone Button
Programming
521
LCR Route Plan Digit
Analysis Assignment
,
+ROG
This program builds the basic LCR Analysis Table.
521-00 Analysis Digits
n,
+ROG
n = Up to 11 digits
Wild Card uses
Q
and
;
where
;
= 0~9 and
Q
= 2~9
Enter the external digit strings (area codes, toll prefixes, service
codes, etc.) to be assigned to a Route Plan Analysis Table.
Strings may be up to 32 digits long. There Route Plan Analysis Table
may have 1280 members. A digit string can only be in one table at a
time.
521-01 Route Plan Number
)%
, n,
+ROG
,
+ROG
n = 0~64
(default = 0)
Enter the Route Plan number to which to assign the Analysis Digits.
Note Entering 0 deletes the Analysis Digits from the table to which
they had been assigned.
522
LCR Exception
Number Route Plans
,
+ROG
This command assigns up to 1280 dialed external digit strings to the
Route Plan Exception Analysis Table which assigns each string to 1
of 64 Route Choice Tables. The values expressed here are
exceptions to the values established in Program 521.
522-00 Exception Route Plan
Ta bl e
n,
+ROG
n = Up to 11 digits
Wild Card uses
Q
and
;
where
;
= 0~9 and
Q
=
2~9
Enter the external digit strings (area codes, toll prefixes, service
codes, etc.) to be assigned to a Route Plan Exception Analysis Table.
Strings may be up to 32 digits long. The Exception Route Plan
Analysis Table may have 1280 members. A digit string can only be in
one table at a time.
522-01 Exception Route Plan
)%
, n,
+ROG
,
+ROG
n = 1~64
(default = 0)
Enter the Route Plan Table in which to assign the Exception Digits.
Note Entering 0 deletes the Exception Digits from the table.
523
LCR Route Plan
Schedule Assignment
,
+ROG
This command assigns Route Plan Schedule Tables for LCR. Each
table is a 3-dimensional array of 144 values (3 Types of Day x 3
Times of Day x 16 LCR Groups).
523-00 Route Plan
n,
+ROG
n = 1~64 Enter the Route Plan Number to build a schedule indexed by Time of
Day, Type of Day and LCR Group.
523-01 Type of Day
)%
, n,
+ROG
n = 1. Weekday
2. Weekend
3. Holiday
Select the Type of Day.
523-02 LCR Time of Day
)%
, n,
+ROG
n = 1. Time Zone1
2. Time Zone2
3. Night
Select the Time Zone.
523-03 Station LCR Group
)%
, n,
+ROG
n = 1~16
(default = 1)
Select the Station LCR Group.
523-04 Route Choice Table
)%
, n,
+ROG
,
+ROG
n = 1~128
(default = 1)
Enter the Route Choice Table Number to be used with this
combination of time, type and LCR group.
Table 13-35 Programs 500~577 (continued)
Button Sequence Value(s) Summary
To Next Page
Loading...
