Toshiba Strata CTX28 - Page 423

Telephone Button Programming
900 Series Programs
Strata CTX Programming - Part 3: Telephone Button Programming 6/04 13-99
Telephone Button
Programming
Reading the Version Code
The figure below is an example of the Strata CTX software version code.
Figure 13-3 Version Code
• Product ID – This is the first character in the version code string. “N” designates CTX670 and “S”
CTX100.
• Country Code – “A” identifies the country (USA, Canada, Mexico).
• CTX Release Level – This string of numbers identifies the Strata CTX Release level (NA101=R1.01,
NA102=R1.02, NA103=R1.03, etc).
• CTX Software Version – This string of characters identifies the current software version. For the
example above, the software is called “M00XX, MA2XX, MA3XX, etc,” where XX is the version
number.
• DTMF Version – This three character string identifies the existence of DTMF and ABR circuits and
the version. The “D” designation indicates that DTMF is being applied to the Strata CTX while “09”
indicates the DTMF version number.
• Installed Equipment ID – There are five characters, each referencing a unique equipment
identification value assigned to hardware installed in your Strata CTX system. If the particular
hardware is not installed a “-” displays. The following are the equipment identifier designations.
• B – BBMS is installed.
• X – BEXS is installed.
• S – BSIS is installed.
• E – The Ethernet is installed.
• M – The Modem is installed.
NA101M00XXP1D12BXSEM.00
NA102MA2XXP1D12BXSEM.00
NA103MA3XXP1D12BXSEM.00
CTX
Software
Version
IPL
Version
CTX
Release
Level
6499
Product ID
Country
Code
Installed
Equipment ID
- Release 1.01
- Release 1.02
- Release 1.03
DTMF
Version