System Error Codes
System Programming Error Codes
Strata CTX Programming - Part 4: Appendices 6/04 B-3
System Error Codes
104 -
See “Common Error Code Table” on page B-1.
105
33
)%a)%
The entered Clock value is out of range.
33
)%
The Paging Group No. entered is out of the range.
49
)%
)%
The BIOU general relay number value conflicts with existing
parameter assignments.
49
)%a)%
The entered circuit number is not the clock source port.
80
)%
The Paging Group No. entered does not exist in the system.
106 -
See “Common Error Code Table” on page B-1.
107
33
)%a)%
The entered Pad device number is invalid.
96
)%a)%
The number of Pad groups exceed the system capacity.
108
33
)%
The entered Device Type is out of range.
33
)%
The PAD group entered is out of the range.
80
)%
The Device number entered does not exist in the system.
109
33
)%a)%
The entered equipment is out of range.
49
)%a)%
The equipment which the card type was assigned was not
entered.
50
)%a)%
The entered equipment is registered as MOH already.
80
)%a)%
A BIOU circuit with other data such as door phone, etc. is
assigned in MOH/BGM 1~7.
80
)%a)%
A circuit with a non-STU circuit is designated in MOH/BGM
8~16.
110 16
Identification error: A super user password cannot be checked
if you are logged in with a general user level password.
111 -
See “Common Error Code Table” on page B-1.
112
33
)%
The entered date is out of range.
98
Allowable number of Working Day Type has been exceeded.
113 33
)%a)%
The entered time value is out of range.
114 -
See “Common Error Code Table” on page B-1.
115 -
See “Common Error Code Table” on page B-1.
116 33
)%
The Program Number entered is invalid.
117
32
)%
An invalid character exists in the entered value.
51
)%
The inputted analysis number is using in a part of the other
analysis number.
118
)%
Incorrect Master ID code.
119
Common error. See Common Error Code table.
150 32
)%
Incorrect value. The values should be numerals only.
Program Code FB
Sub-
parameter
Error Descriptions
To Next Page
Loading...
