u-blox ZED-F9P - Page 160

u-blox ZED-F9P Interface Description - Manual
Advance Information
Name Description
gnssFixOK
1 = valid fix (i.e within DOP & accuracy masks)
diffSoln
1 = differential corrections were applied
psmState
Power Save Mode state (see Power Management):
0: PSM is not active
1: Enabled (an intermediate state before Acquisition state
2: Acquisition
3: Tracking
4: Power Optimized Tracking
5: Inactive
headVehValid
1 = heading of vehicle is valid
carrSoln
Carrier phase range solution status:
0: no carrier phase range solution
1: float solution (no fixed integer carrier phase measurements have been used to calculate the solution)
2: fixed solution (one or more fixed integer carrier phase range measurements have been used to calculate the
solution)
Bitfield flags2
This graphic explains the bits of flags2
Name Description
confirmedAvai
1 = information about UTC Date and Time of Day validity confirmation is available (see Time Validity section for
details). This flag is only supported in Protocol Versions 19.00, 19.10, 20.10, 20.20, 20.30, 22.00, 23.00, 23.01,
27 and 28.
confirmedDate
1 = UTC Date validity could be confirmed (see Time Validity section for details)
confirmedTime
1 = UTC Time of Day could be confirmed (see Time Validity section for details)
UBX-18010854 - R04 Advance Information Page 152 of 259