6-8 TM-500 User’s Guide
System Alarm Messages D292144.9.fm
Tape Jam Sensor System Alarm
The Tape Jam Sensor is located on the Taper Track just
before the Sealer. It detects when parts are protruding
above the top of the pocket due to a misplaced part or
tape jam.
When the Tape Jam sensor is enabled and a jam occurs, operation stops, a beep sounds and a
warning appears on the HMI.
Clear the tape jam and then press CONTINUE to clear the error message and continue opera-
tion.
To Next Page
Loading...
