Valleylab CUSA EXcel-8 - Checkout Procedures; Maintaining the CUSA Excel System

Warnings, Cautions, and Notices
To avoid injury to surgical personnel, keep fingers away from the suction pinch
valve while powering the unit on or off, activating vibration, or using fast flush.
Checkout Procedures
Do not allow the handpiece tip to contact anyone or anything during tip activation.
Contact may result in patient injury, user injury, or handpiece tip damage.
№
э/е
|8UU0SJ84
291A18S
Notice
To avoid product damage, NEVER hold the handpiece in your hand while using
the torque wrench to tighten or loosen the tip.
Maintaining the CUSA EXcel System
0 «“«ὕ“όὃἃ«ᾱἃὃἃἝἃἝὃἝἃᾱἝἃ“ςἝ«ἄἃἄναυυαυυ
Electric Shock Hazard Always unplug the CUSA system before cleaning.
Notice
Do not rub, press, or touch any panels with solvents; caustic, corrosive, or
abrasive cleaning or disinfectant compounds; or other materials that could
scratch the panels. Do not use a betadine-based solution; it will cause
discoloration.
Do not allow fluids to enter the chassis.
Do not clean the sterilizer case with abrasives. Product damage will result.
Product damage will result if you do not follow these notices when cleaning the
handpiece:
¢ Do not immerse the handpiece cable electrical connector in liquid.
+ Do not use ultrasonic or automated cleaners.
* Do not use chlorinated substances such as bleach solution.
* Do not clean the handpiece with abrasives such as Ajax, Comet, or steel wool.
I Product damage will result if you do not follow these notices when cleaning the
Tip Torquing Set.
* Do not use ultrasonic or automatic washers.
e Do not autoclave.
* Do not use chlorinated substances such as bleach solution.
E | * Do not clean with abrasives such as Ajax, Comet, or steel wool.
6
CUSAEXcel-8
System
Service
Manual