Vertiv Liebert AC8 - Page 148

Setup Modem & Pagers - Modem Setup
SETUP MODEM&PAGERS
Input pager and
modem information
Select pager or modem
CURRENT NUMBER
*******************
1=PAGER NUMBER 1An "A" is required
2=PAGER NUMBER 2as 1st character
3=PAGER NUMBER 3for an alpha pager,
4=PAGER NUMBER 4an "N" for a numeric
5=MODEM CONFIGURATIONpager, and an "M"
6=RETURN TO SETUP MENUfor a remote modem.
7=RETURN TO MAIN MENU
*******************
SELECT A NUMBER:5
>CHANGE MODEM INITIALIZATION STRING(40 CHARACTERS MAX).
>[ATS0=1]
>[
>COMMAND SUCCESSFUL
>ENTER AC8 PHONE NUMBER(40 CHARACTERS MAX). (Service Terminal Interface only)
>[]
>[
>COMMAND SUCCESSFUL
>ENABLE MODEM DIAGNOSTIC MESSAGES-YES(Y) OR NO(N)? (Service Terminal Interface only)
>[N]
>[
>COMMAND SUCCESSFUL
>CHANGE MODEM DIAL PREFIX. (Service Terminal Interface only)
>[ATE0X4DT]
>[
>COMMAND SUCCESSFUL
>CHANGE MODEM HANG UP DELAY AFTER A CALL(99 SEC MAX). (Service Terminal Interface
only)
>[10]
>[
>COMMAND SUCCESSFUL
Vertiv | Liebert® AC8 User Manual | 142