Vertiv Liebert AC8 - Setup System - Setup System Info

>ENABLE COMMUNICATIONS CHECK-YES(Y) OR NO(N)?
>[N]
>[
>COMMAND SUCCESSFUL
• Press Enter to proceed, or Escape to cancel the entry. If you make a change, a confirmation
message appears: “Command Successful.”
Enter Time To Perform Communications Check
This function schedules the daily communications test between the Liebert AC8 and the selected pager,
as described in the previous section.
• At the Enter Time To Perform Communications Check prompt, enter the time to initiate the
communications check, using the format HH:MM (hours and minutes in military time), ranging
from 00:00 for midnight to 23:59 for 11:59 p.m. The current setting appears in brackets—
[00:00] in the following example.
>ENTER TIME TO PERFORM COMMUNICATIONS CHECK(HH:MM).
>[00:00]
>[
>COMMAND SUCCESSFUL
• Press Enter to proceed, or Escape to cancel the entry. If you make a change, a confirmation
message appears: “Command Successful.”
7.9 Setup System - Setup System Info
The Setup System Info options allow users to:
• Change Password—used for access to system setup functions
• Change Date & Time/Automatic Daylight Saving Time—used to set the Liebert AC8’s date and
time and to enable automatic time change for Daylight Saving Time
• Setup Site ID—the Liebert AC8’s location to differentiate among sites if more than one Liebert
AC8 is in use
• Connect Battery—stops the Liebert AC8 battery from backing up the panel
• Backup and Upload Configuration File (Service Terminal Interface only)—permits the user to
copy the Liebert AC8’s configuration settings and to upload the file to the Liebert AC8
• Setup Serv Ph Num—enables alarm notification to the telephone number entered (in addition
to the four pager numbers).
• Restore Defaults—returns the Liebert AC8 to its factory settings
• Perform Firmware Update (Service Terminal Interface only)—changes the Liebert AC8’s
firmware to newest version
• Initiate Remote Alarm Test (Service Terminal Interface only)—used to test auxiliary alarm
To change any Setup System Info features:
Vertiv | Liebert® AC8 User Manual | 82