5 VIEW STATUS OPTIONS
NOTE: For ease of understanding, this section uses the LCD interface to illustrate most instructions,
except for features that are available only through the Service Terminal Interface. All Service Terminal
Interface screens appear in Service Terminal Interface on page109.
The View Status menu allows any user to view currently active alarms, monitoring data stored in the
alarm, event and trend logs, the status of all inputs and outputs, and the four pager numbers. The arrows
are used to scroll through the menu. The Enter key is used to select the menu item.
This section presents step-by-step instructions for each of the following options:
• View Active Alarms • View Trend Log • View Pager Numbers
• View Alarm Log • View Input Status • View Operation
• View Event Log • View Output Status • View Control Status
Figure 5.1 on the next page shows the main options available from the View Status menu.
Vertiv | Liebert® AC8 User Manual | 35
To Next Page
Loading...
