Setup Modem & Pagers - Pager Setup
SETUP MODEM&PAGERS
Input pager and
modem information
Select pager or modem
CURRENT NUMBER
*******************
1=PAGER NUMBER 1An "A" is required
2=PAGER NUMBER 2as 1st character
3=PAGER NUMBER 3for an alpha pager,
4=PAGER NUMBER 4an "N" for a numeric
5=MODEM CONFIGURATIONpager, and an "M"
6=RETURN TO SETUP MENUfor a remote modem.
7=RETURN TO MAIN MENU
*******************
SELECT A NUMBER:1
• At the Enter Pager Number prompt, you may press Enter to bypass this option (or see Pager
Setup - Pager Number and PIN on page78 for instructions on entering the pager number).
>ENTER PAGER NUMBER(40 CHARACTERS MAX).
>[]
>[
>COMMAND SUCCESSFUL
• At the Enter Pager PIN Number prompt, you may press Enter to bypass this option (or see
Pager Setup - Pager Number and PIN on page78 for instructions on entering the pager PIN).
>ENTER PAGER PIN NUMBER (20 CHARACTERS MAX).
>[]
>[
>COMMAND SUCCESSFUL
Enable Communications Check
Enabling this function permits a daily communications test between the Liebert AC8 and the selected
pager. Once each day the Liebert AC8 dials the pager at a specified time and sends this message: “AC8
COMM CHECK.” (The time of the test is specified at the next prompt, Enter Time To Perform
Communications Check on the next page.)
• At the Enable Communications Check prompt, enter Y (Yes - enable) or N (No - disable). The
current setting appears in brackets—[N] in the following example.
Vertiv | Liebert® AC8 User Manual | 81
To Next Page
Loading...
