Vertiv Liebert AC8 - Page 155

Factory Defaults
RESTORE FACTORY DEFAULTS
This command restores all panel
information to factory settings
1=RESTORE FACTORY DEFAULTS
2=RETURN TO SETUP SYSTEM INFO MENU
3=RETURN TO SETUP MENU
4=RETURN TO MAIN MENU
SELECT A NUMBER:1
>RESTORE THE PANEL TO FACTORY SETTINGS-YES(Y) OR NO(N)?
>[N]
[[
>COMMAND SUCCESSFUL
Initiate Remote Alarm Test (Service Terminal Interface only)
For details on this feature, see Initiate Remote Alarm Test (Service Terminal Interface only) on page93.
Initiate Remote Alarm Test
INITIATE REMOTE ALARM TEST
This command simulates an alarm
to test alarm notification
for the service phone number
1=INITIATE REMOTE ALARM TEST
2=RETURN TO SETUP SYSTEM INFO MENU
3=RETURN TO SETUP MENU
4=RETURN TO MAIN MENU
SELECT A NUMBER:1
>SIMULATE AN ALARM CONDITION-YES(Y) OR NO(N)?
>[N]
>[
>COMMAND SUCCESSFUL
Setup Operation
For details on this feature, see Setup Operation on page95.
Auto Sequencing
For details on this feature, see Turn Automatic Sequencing On or Off on page96.
Vertiv | Liebert® AC8 User Manual | 149