Vertiv Liebert AC8 - Page 159

>COMMAND SUCCESSFUL
Failed Standby
For details on this feature, see Specify Failed Standby Response on page98.
Setup Operation - Failed Standby
SETUP OPERATION BY ZONE
Select the zone for which
operation is to change
ZONE
1=ZONE 1
2=ZONE 2
3=ZONE 3
4=ZONE 4
5=RETURN TO SETUP MENU
6=RETURN TO MAIN MENU
SELECT A NUMBER:1
SETUP OPERATION
Select operation to edit
for zone 1
OPERATIONSTATE
1=AUTO SEQUENCINGOFF
2=STANDBY TESTINGOFF
3=FAILED STANDBYN
4=HOLD DELAY10:00
5=RESTART DELAY00:06
6=STAGINGOFF
7=RETURN TO SETUP MENU
8=RETURN TO MAIN MENU
SELECT A NUMBER:3
>IF FAILED STANDBY,IN SAME FAILED ZONE, ENABLE A DISABLED UNIT-YES(Y) OR NO(N)?
>[N]
>[Y]
>COMMAND SUCCESSFUL
Vertiv | Liebert® AC8 User Manual | 153