• At the Setup Menu, enter 7 (Setup System Information).
• At the Setup System Information Menu, enter 6 (Setup Service Phone Number).
• At the Setup Service Phone Number menu, shown below, enter 1 to begin the setup.
Setup Service Phone Number
SETUP SERVICE PHONE NUMBER
This number receives all alarms in addition to the 4 pagers
CURRENT NUMBER
*******************
1=SETUP SERVICE PHONE NUMBER
2=RETURN TO SETUP SYSTEM INFO MENU
3=RETURN TO SETUP MENUAn “M” is required
4=RETURN TO MAIN MENUas 1st character.
******************
SELECT A NUMBER:1
• At the Enter Service Phone Number prompt, you may press Enter to bypass this option (or see
Setup Serv Ph Num - Enter Phone Number on page88 for instructions on entering the
number).
>ENTER SERVICE PHONE NUMBER(40 CHARACTERS MAX).
>[]
>[
>COMMAND SUCCESSFUL
Enable Communications Check
Enabling this function permits a daily communications test between the Liebert AC8 and the selected
service phone number. Once each day the Liebert AC8 dials the service phone number at a specified time
and sends this message: “AC8 COMM CHECK.” (The time of the test is specified at the next prompt, Enter
Time To Perform Communications Check on page82.)
• At the Enable Communications Check prompt, enter Y (Yes - enable) or N (No - disable). The
current setting appears in brackets—[N] in the following example.
>ENABLE COMMUNICATIONS CHECK-YES(Y) OR NO(N)?
>[N]
>
>COMMAND SUCCESSFUL
• Press Enter to proceed, or Escape to cancel the entry. If you make a change, a confirmation
message appears: “Command Successful.”
Enter Time To Perform Communications Check
This function schedules the daily communications test between the Liebert AC8 and the selected service
phone number, as described in the previous section.
Vertiv | Liebert® AC8 User Manual | 90
To Next Page
Loading...
