WAGO 750 Series User Manual

10 • Important Comments
Font Conventions
WAGO-I/O-SYSTEM 750
Linux Fieldbus Coupler
1.3 Font Conventions
Italic
Names of path and files are marked italic
i.e.: C:\programs\WAGO-IO-CHECK
Italic
Menu items are marked as bold italic
i.e.: Save
\
A backslash between two names marks a sequence of
menu items
i.e.: File\New
END
Press buttons are marked as bold with small capitals
i.e.: ENTER
< >
Keys are marked bold within angle brackets
i.e.: <F5>
Courier
Program code is printed with the font Courier.
i.e.: END_VAR
1.4 Number Notation
Number Code Example Note
Decimal 100 normal notation
Hexadecimal 0x64 C notation
Binary
'100'
'0110.0100'
Within ',
Nibble separated with dots

WAGO 750 Series Specifications

General

Protection Class	IP20
Bus Couplers	PROFIBUS, CANopen, Ethernet
Modules	Digital Input, Digital Output, Analog Input, Analog Output
Mounting	DIN rail mounting
Voltage Supply	24 V DC (typical)
Communication Protocol	Depends on the bus coupler (e.g., PROFIBUS, CANopen, DeviceNet, Ethernet)
Digital Input Channels	Varies by module (e.g., 8, 16 channels)
Digital Output Channels	Varies by module (e.g., 8, 16 channels)
Analog Input Channels	Varies by module (e.g., 2, 4, 8 channels)
Analog Output Channels	1, 2, 4 channels (depending on module)
Width	12 mm, 24 mm (typical module widths)
Number of Channels	Varies by module type
Current Consumption per Channel	Varies by module type