WAGO 750 Series User Manual

226 • Use in Hazardous Environments
Identification
WAGO-I/O-SYSTEM 750
Linux Fieldbus Coupler
11.5 Identification
11.5.1 For Europe
According to CENELEC and IEC
Hansastr. 27
D-32423 Minden
ITEM-NO.:750-400
2DI 24V DC 3.0ms
0.08-2.5mm
2
0V 24V DI1
Di2
PATENTS PENDING
II3G
KEMA 01ATEX1024 X
EEx nA II T4
CL I DIV 2
Grp. A B C D
op temp code T4A
24V DC
AWG 28-14
55°C max ambient
LISTED 22ZA AND 22XM
24246
2101--02----03
II3G
KEMA 01ATEX1024 X
EEx nA II T4
Explosion protection group
Unit category
Community symbol for
explosion protected
electrical components
Approval body and/or number of
the examination certificate
E = conforming with European standards
Ex = explosion protected component
n = Type of ignition
Extended identification
Explosion protection group
Temperature class
Fig. 11-1: Example for lateral labeling of bus modules
(750-400, 2 channel digital input module 24 V DC) g01xx03e

WAGO 750 Series Specifications

General

Protection Class	IP20
Bus Couplers	PROFIBUS, CANopen, Ethernet
Modules	Digital Input, Digital Output, Analog Input, Analog Output
Mounting	DIN rail mounting
Voltage Supply	24 V DC (typical)
Communication Protocol	Depends on the bus coupler (e.g., PROFIBUS, CANopen, DeviceNet, Ethernet)
Digital Input Channels	Varies by module (e.g., 8, 16 channels)
Digital Output Channels	Varies by module (e.g., 8, 16 channels)
Analog Input Channels	Varies by module (e.g., 2, 4, 8 channels)
Analog Output Channels	1, 2, 4 channels (depending on module)
Width	12 mm, 24 mm (typical module widths)
Number of Channels	Varies by module type
Current Consumption per Channel	Varies by module type