WAGO 750 Series User Manual

I/O Modules • 143
Overview
WAGO-I/O-SYSTEM 750
Linux Fieldbus Coupler
PROFIsafe Modules
750-660/000-001
8FDI 24V DC PROFIsafe;
PROFIsafe 8 channel digital input module
750-665/000-001
4FDO 0.5A / 4FDI 24V DC PROFIsafe;
PROFIsafe 4 channel digital input and output module
750-666/000-001
1FDO 10A / 2FDO 0.5A / 2FDI 24V PROFIsafe;
PROFIsafe power switch module
RTC Module
750-640 RTC module
KNX / EIB TP1 Module
750-646 KNX / EIB /TP1 module – device mode / router mode

WAGO 750 Series Specifications

General

Protection Class	IP20
Bus Couplers	PROFIBUS, CANopen, Ethernet
Modules	Digital Input, Digital Output, Analog Input, Analog Output
Mounting	DIN rail mounting
Voltage Supply	24 V DC (typical)
Communication Protocol	Depends on the bus coupler (e.g., PROFIBUS, CANopen, DeviceNet, Ethernet)
Digital Input Channels	Varies by module (e.g., 8, 16 channels)
Digital Output Channels	Varies by module (e.g., 8, 16 channels)
Analog Input Channels	Varies by module (e.g., 2, 4, 8 channels)
Analog Output Channels	1, 2, 4 channels (depending on module)
Width	12 mm, 24 mm (typical module widths)
Number of Channels	Varies by module type
Current Consumption per Channel	Varies by module type