23
For set item, refer to P4
(m)
(n)
(o)
(p)
For set item, refer to P5
(q)
(r)
0～15(Zero is silent and 15 is
maximum)
15
FAILURE
SOUND
m
Have the sound of jacking-up failure
(collision detected) and LED demo been
set?
OFF：There shall be no sound and
LED demo when the jacking-up fails.
ON ：There will be sound and LED
demo when the jacking-up fails.
ON
GAME
VOLUME
Volume in GAME BGM
n
SE VOLUME
Volume in SE-correlated
o
ERROR
VOLUME
Volume in ERROR alarm
p
PUSHER
CONTINUE
q
According to the saved games, the
action of returning to the initial position
can be directly omitted after the game is
over. It can directly be set whether it is
jacked-up once again.
※Once this setting is set, this function will be
activated once the set games are reached.
Once this function is activated, this function
will continue until the game becomes 0.
OFF：Every time the game is
over, the game will return to the
initial position.
ON ：After the game is over,
the remaining games will
directly be omited and return to
the original position.
2～10：According to the saved
games, once the game is over,
the action to return to the
original position will be omitted
(this function is used to save
the game).
OFF
FREE TRIAL
r
Is the free function set ( there is no need
to put in the coins and the joystick can be
swung)?
※If this setting is ON, DEMO action will be set
according to DEMO ACTION.
OFF：There is no free function
ON ：There is free function
OFF
11.
Return to the main menu by pressing [BACK].
（In setting the change, return to the main menu after the change is set）
Set the interface to be changed
When the setting is changed with the arrow at YES:
press [SETTING] to confirm.
If the setting is not changed with the arrow at NO:
press [SETTING] or [BACK] to return.
The initial position of the arrow is at NO.
10.
To change from the original to the required, press [SETTING] or [BACK] to display
the followings.
8.
Select the item to be set by pressing [↑] and [↓].
9.
Change the setting-value of the selected item by pressing [←] or [→].
SN
Item Name Contents Set Range
Initial
value
To Next Page
Loading...
