EasyManua.ls Logo

WAHLAP TECH PUSHING POINTS - Page 40

WAHLAP TECH PUSHING POINTS
121 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
E41
The closing limit-sensor malfunctions.
E41 CLOSE LIMIT
When the sealing-plate is
closed, the closing
limit-sensor does not
sense within 5 seconds.
Sealing-plate
(motor side)
The closing
limit-sensor gives
an error
E42
1.A prize is blocked on the opening-side
of the sealing-plate because the
sealing-plate is not fully opened.
2.It is possible that the door-spring may
come loose (please refer to "5.2.31" on
P57 for how to adjust the door-spring)
E42 OPEN JAM
It has nothing to do with
the opening limiter and the
opening sensor does not
sense within 2 seconds.
Sealing-plate
The opening-sensor
gives an error
1.A prize is blocked on the closing-side
of the sealing-plate because the
sealing-plate is not fully closed.
2.It is possible that the door-spring may
come loose (please refer to "5.2.31" on
P57 for how to adjust the door-spring)
It has nothing to do with
the closing limiter and the
closing-sensor does not
sense within 2 seconds.
E43
E43 CLOSE JAM
Sealing-plate
The closing
limit-sensor gives an
error
E50
E50 PRIZE JAM
1.Make sure whether the prize is
blocked near the sensor.
2.The optical-eye box is out of order.
(please refer to secton on P36 for how
to calibrate the optical-eye box)
If the blocked-prize is about to be
given to the player, press the prize
count button to hop the stopwatch
automatically after the error is
remedied.
If the prize falls off, the
sensor will be on for 1
second without turning off.
The prize-block
gives an error
E97
If it is not improved when the
power-OFF is changed to power-ON,
replace the main board.
E97 SUBCPU COMM
There is a communication
error between CPU and
SUB CPU on the main
board.
Communication
error
E98
E98 BATTERY LOW
The battery on the main
board is detected in a low
voltage.
Please replace the battery on the
main board
This error can only be detected at
startup. After a certain period of time,
press the button on the control panel
and it will be automatically removed.
Low battery
E99
E99 PROGRAM VER
The version of MAIN CPU
is inconsistent with that of
SUB CPU and SOUND
ROM.
The wrong program is laoded to the
main board.
Version error
E51
E51 PRIZE FALL
While not in the game (the
sealing-plate is closed),
the prize-dropping is
sensed by the sensor.
Check whether there is an inappropriate
act or a prize-dropping fault.
The prize-error
gives an error
E40
The opening limit-sensor malfunctions.
E40 OPEN LIMIT
When the sealing-plate is
opened, the opening
limit-sensor does not
sense within 5 seconds.
Sealing-plate
(motor side)
The opening
limit-sensor gives
an error
34
Error
Code
LCD
Display
Error
Meaning
Causes Way to remove

Table of Contents

Related product manuals