Wallace Perimeter Security ALPHA - Page 97

Alpha/Delta (Kinetic Operator) Installation and Maintenance Manual Revision 1 - MAY 2023
97
USER MENU FUNCTIONS
Table 5. SmartDC Controller - User Menu Funcons
Ref.
No�
User Menu Seng Opons
(Bold = Factory
Sengs)
Menu Tasks and Explanaons
Associated
DC Controller
Connecons
Display
Table Notes
The following condions apply to the indicated reference-numbered menu selecons.
Table Note 1:
For gate operators using Type D entrapment protecon, an automac closing device (such as a mer, loop sensor, or similar
device) shall not be employed. For addional informaon, refer to “Choosing External Entrapment Protecon” on page 28.
Table Note 2:
WARNING: Do NOT cut the wires to the buzzer or unplug it as the operator will not be in compliance with UL 325. Failure to
comply may result in serious injury or death.