Wieland samos PRO COMPACT - State Bits

EtherNet/IP gateway
Wieland Electric GmbH | BA000970 | 11/2016 (Rev. F)
113
State bits
1179413387
The EtherNet/IP gateway SP-EN-IP sets state bits, which are available in the logic editor of sa-
mosPLAN5+ for processing.
Table 65: Meaning of the state bits SP-EN-IP[0] in the logic editor
Name of the state bits
Set to 1, if ...
Reset to 0 ...
Output state ... a GetAttribute command
was processed successfully,
or
... data of transport class 1
were sent to a PLC without
errors.
... if a connection of transport
class 1 (implicit connection)
was terminated and no further
connection exists.
Input state
... a SetAttribute command was
processed successfully,
or
... data of transport class 1
received without error (consu-
med), whereby heartbeat data
of connection point 198 from
the PLC does not count
... a connection of transport
class 1 (implicit connection)
was terminated for one of the
connection points 57, 138,
139, 140 or 141 and no further
connection exists to these
connection points.
Internal state ... the EtherNet/IP function of
the module is ready for com-
munication.
... the EtherNet/IP function of
the module is not ready for
communication.
8.10