About this manual
Wieland Electric GmbH | BA000970 | 11/2016 (Rev. F)
About this manual
910719883
Please read this section carefully before you work with these operating instructions and the
samosPRO gateways.
Function of this document
910721419
There are three manuals for the samosPRO system with clearly delineated areas of application
as well as installation instructions and brief instructions for each module.
• This
describes all samosPRO gateways and their functions in detail. It in-
structs the technical staff of the machine manufacturer or machine operator in the safe in-
stallation, configuration, electrical installation, commissioning, operation and maintenance
of the samosPRO gateways.
This manual does
provide operating instructions for the machine, which incorporates
modular samosPRO safety controls and a samosPRO gateway. Information in this regard is
provided in the operating instructions for each machine.
This manual is only valid in combination with the other samosPRO manuals (see
Scope of
validity and applicable documents [ch. 1.2, p. 9]
).
• The
describes the software-supported configuration and parameterizati-
on of the samosPRO safety control. In addition, the software manual contains a description
of the important diagnostic functions for operation and detailed information for identifying
and eliminating errors. Use the software manual mainly when configuring, commissioning
and operating samosPRO safety controls.
• The
describes all of the modules and their functions in detail. Use the
hardware manual mainly for designing devices.
• Each module contains the
installation instructions/brief instructions
. These instructions
provide information on the fundamental technical specifications of the modules and con-
tain simple installation instructions. Use the installation instructions/brief instructions when
installing the samosPRO safety control.
This manual contains original operating instructions in accordance with the Machinery Directi-
ve.
To Next Page
Loading...
