EtherCAT Gateway
Wieland Electric GmbH | BA000970 | 11/2016 (Rev. F)
Configuring an EtherCAT network
1077825547
A device description file (ESI =
therCAT
lave
nformation) in XML format is delivered with
the SP-EN-ETC. The EtherCAT master integrates this file into the EtherCAT system so that the
master has the necessary EtherCAT configuration data and can establish a connection to the
gateway.
Please read the manual depending on your controller to see which steps are required in detail.
To Next Page
Loading...
