Safety
Wieland Electric GmbH | BA000970 | 11/2016 (Rev. F)
May only be used in an industrial environment
The samosPRO system fulfills the requirements for class A (industrial applications) according
to the "Emitted interference" basic technical standard. The samosPRO system is therefore
only suitable for use in an industrial environment.
Environmentally friendly behavior
888332555
The modular samosPRO safety control and the corresponding modules are designed such that
they stress the environment as little as possible. They use only a minimum of power and re-
sources.
Make sure that you also carry out work while always considering the environment.
Disposal
888334091
The disposal of unusable or irreparable devices should always be done in accordance with the
respectively valid country-specific waste-elimination guidelines (e.g. European Waste Code 16
02 14).
We will be happy to help you in disposing of these devices.
Simply contact us.
Sorting of materials
888335627
• The sorting of materials may only be carried out by qualified persons!
• Care must be used when disassembling the devices. There is a risk of injuries during this
process.
Before you can route the devices to the environmentally-friendly recycling process, it is neces-
sary to sort the various materials of the samosPRO devices.
Separate the housing from the rest of the components (particularly from the PC board).
Place the separated components into the corresponding recycling containers (see the
following table).
Table 2: Overview of disposal according to components
Product
Housing
PC boards, cables, connectors, and
electric connecting pieces
Plastic recycling
Electronics recycling
Packaging
Paper/cardboard recycling
To Next Page
Loading...