Wieland samos PRO COMPACT - Initial configuration steps

Installation and basic configuration
Wieland Electric GmbH | BA000970 | 11/2016 (Rev. F)
34
Initial configuration steps
910757771
How do you configure gateways? This chapter provides some brief guidelines.
Table 14: Guidelines for gateway configuration
Step
Description
1
Establishing a link between the gateway and PC
See here for more detailed information:
Software manual, chapter "Connect with the safety control"
2
Configure gateway
You will find detailed information in this regard at the following points in the
gateway manual:
• Modbus TCP gateway [ch. 6, p. 49]
•
PROFINET IO-Gateway [ch. 7, p. 62]
•
EtherNet/IP gateway [ch. 8, p. 76]
•
PROFIBUS DP gateway [ch. 9, p. 114]
•
CANopen gateway [ch. 10, p. 129]
• EtherCAT Gateway [ch. 11, p. 166]
3
Transmitting and verifying the configuration
See here for more detailed information:
Software manual, chapter "Transferring the system configuration"
4.3