Wieland samos PRO COMPACT - Page 24

Product description
Wieland Electric GmbH | BA000970 | 11/2016 (Rev. F)
24
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Byte 2
I8 vs. T2/4
test pulse
compari-
son
I7 vs. T1/3
test pulse
compari-
son
I6 vs. T2/4
test pulse
compari-
son
I5 vs. T1/3
test pulse
compari-
son
I4 vs. T2/4
test pulse
compari-
son
I3 vs. T1/3
test pulse
compari-
son
I2 vs. T2/4
test pulse
compari-
son
I1 vs. T1/3
test pulse
compari-
son
Byte 3
I16 vs.
T2/4 test
pulse
compari-
son
I15 vs.
T1/3 test
pulse
compari-
son
I14 vs.
T2/4 test
pulse
compari-
son
I13 vs.
T1/3 test
pulse
compari-
son
I12 vs.
T2/4 test
pulse
compari-
son
I11 vs.
T1/3 test
pulse
compari-
son
I10 vs.
T2/4 test
pulse
compari-
son
I9 vs. T1/3
test pulse
compari-
son
Byte 4
Reserved Reserved Reserved Reserved IQ4 vs.
T2/4 test
pulse
compari-
son
IQ3 vs.
T1/3 test
pulse
compari-
son
IQ2 vs.
T2/4 test
pulse
compari-
son
IQ1 vs.
T1/3 test
pulse
compari-
son
Byte 5
I15/I16
two-
channel
state
0: Error
1: ok or
not used
I13/I14
two-
channel
state
0: Error
1: ok or
not used
I11/I12
two-
channel
state
0: Error
1: ok or
not used
I9/I10
two-
channel
state
0: Error
1: ok or
not used
I7/I8
two-
channel
state
0: Error
1: ok or
not used
I5/I6
two-
channel
state
0: Error
1: ok or
not used
I3/I4
two-
channel
state
0: Error
1: ok or
not used
I1/I2
two-
channel
state
0: Error
1: ok or
not used
Byte 6
Reserved Reserved Reserved Reserved Reserved Reserved IQ3/IQ4
two-
channel
state
0: Error
1: ok or
not used
IQ1/IQ2
two-
channel
state
0: Error
1: ok or
not used
Byte 7
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Byte 8
Q4
Stuck at
low
Q4
Stuck at
high
Q3
Stuck at
low
Q3
Stuck at
high
Q2
Stuck at
low
Q2
Stuck at
high
Q1
Stuck at
low
Q1
Stuck at
high
Byte 9
IQ4 (Out-
put)
Stuck at
low
IQ4 (Out-
put)
Stuck at
high
IQ3 (Out-
put)
Stuck at
low
IQ3 (Out-
put)
Stuck at
high
IQ2 (Out-
put)
Stuck at
low
IQ2 (Out-
put)
Stuck at
high
IQ1 (Out-
put)
Stuck at
low
IQ1 (Out-
put)
Stuck at
high
Module state bits of the I/O modules SP-SDI and SP-SDIO
NOTICE
The module state bits for the SP-SDI and SP-SDIO modules are only fully supported from
firmware version 1.2.x.
The module state bits have the following meaning, if not otherwise indicated:
0 = error
1 = no error