Wieland samos PRO COMPACT - Page 74

PROFINET IO-Gateway
Wieland Electric GmbH | BA000970 | 11/2016 (Rev. F)
74
Error
Possible cause
Possible remedy
The SP-COP2-ENI / the
samosPRO system is in
the “Critical error” state.
• The SP-COP2-ENI module
is not properly connected
to the samosPRO mo-
dules.
• The module connection
plug is dirty or damaged.
• Another samosPRO mo-
dule has an internal criti-
cal error.
• Insert the I/O module cor-
rectly. Clean the connection
plug and socket.
• Switch on the power supply
again.
• Check the other samosPRO
modules.
LED PWR
Green
LED LINK
Green
LED /ACT
Yellow
MS LED
Red