WinGD X72 - Page 10

6/7 16/11/2017
Summary for Operation Manual (OM)
Page No. Title Subject
Date No.
new
exch.
Manual
Modification Service
Engine Documentation
X72
Modification
Page or
0710-1/A1 2016-11
General
Update
Diesel Engine Fuels
-minor text changes;
-para 3.4: maximum permitted sulphur value changed from
4.5% m/m to 3.5% m/m;
x
0750-1/A1 2016-11 RT-138 Issue5
Operating Media -
Lubricating Oils
-Fig. 1 and Fig. 2 updated
-para 2.1.1 recommend temperature change from 96°C -
98°C to 95°C
-para 2.1.2 removed (only applicable for RT-flex, W-X82
and W-X92)
-para 2.3 data about the fine filter size deleted
-para 2.3.1 data about acceptable samples removed
-para 3 structure changed (para 3.1 and 3.2 swapped),
Note added
-para 3.1 data about recommended intervals removed,
Note added
-para 3.2 Note added, data about BN40 removed,
-para 3.3 15BN and 25BN lubricating oils added, range (for
25 < BN < 100 lubricating oils) added
-para 8.2 Cylinder Lubricating Oils,
Table 4: Data updated, 'blending on board additives' added
to header; List updated;
Notes to Table 4; data in note deleted, in Note 1) data
removed,
Table 5: Oil supplier CPC added; system oil Mobilguard
300C added; Note 2 added to Supermar AS;
-para 2.3 Particle Size and Count, Table 3: Data updated
x
Group 4 2016-11
General
Update
Group TOC New document 4002-1/A1 added; x
4002-1/A1 2016-11
EAAD086205
EAAD086428
Engine Control System
UNIC
CV7071-73C removed from MCM-11
PT2021C added to MCM-11
Moved JT5156/57C from CCM #1 to MCM-11
Changed color for ICC signals on IOM-10 and removed
“ICC only” remark, Added CY7036C Aux Blow #1 Setp. to
MCM-11,
Added CY7037C Aux Blow #2 Setp. to IOM-10
Sorted signals on MCM-11 and IOM-10 by signal numbers
Added Note “** = Only for E21 with Frequency Converter”
Added “and / or number of TC” to note “*”.
x
4002-4/A1 2016-11
General
Update
ECS Modules -
Replacement
New document added; x
4003-2/A0 2016-11
SCR
integration
Control Diagram -
Identification of Parts
CV7077C added x
4003-2/A1 2016-11 EAAD086961 Engine Control Diagram New design exhaust waste gate, SCR x
4003-5/A1 2016-11 EAAD086849
Pipe Diagrams - Oil
Systems (internal TC oil
supply)
Schema updated (TI2601L added) x
4003-6/A1 2016-11 EAAD086849
Pipe Diagrams - Oil
Systems (external TC oil
supply)
Schema updated (TI2601L added) x
4003-9/A1 2016-11 EAAD086849
Pipe Diagrams - Air
Systems (Starting and
Control Air)
Schema updated (PT4341C added) x
4003-10/A2 2016-11 EAAD086849
Pipe Diagrams - Air
Systems (Exhaust Gas
and Scavenge Air)
New schema added, SCR design, one turbocharger x
4003-11/A1 2016-11 EAAD086849
Pipe Diagrams - Fuel,
Drain and Extinguising
Systems
Schema updated x