WinGD X72 - Engine Control

Operation
4003−1/A1
Winterthur Gas & Diesel Ltd.
1/ 11
Engine Control
1. General 1..........................................................
2. Engine Control Functions 1.........................................
3. Engine Local Control 2..............................................
3.1 Preparation 2.................................................
3.2 Engine Start 2................................................
3.3 Reverse 2....................................................
3.4 Engine Stop 2................................................
3.5 Control Transfer 3............................................
4. Engine Control System Checks 4....................................
4.1 General 4.....................................................
4.2 Control Air Supply Unit 4......................................
4.3 ECS Start 5...................................................
4.4 Safety and Alarm System 5....................................
4.5 Auxiliary Blowers 7...........................................
4.6 Servo Oil System 8............................................
4.7 Exhaust Valve Drive 8.........................................
4.8 Cylinder Lubrication 9.........................................
4.9 Fuel System 9................................................
4.10 Starting System and Start Interlock 9...........................
4.11 Overspeed Limit 11............................................
4.12 Engine Start on Fuel 11.........................................
1. General
The Control Diagram is a schematic diagram of all control components and their
connections.
All code numbers and names used in the data that follow are found in the control
diagram, see 4003−2 Engine Control Diagram.
2. Engine Control Functions
The engine control system has the functions that follow:
D Engine start, operation, maneuvering and shut-down
D Engine speed control
D A function to monitor the engine
D Control transfer.
2015-12