Operation7218−1/A1
Winterthur Gas & Diesel Ltd.
12/ 12
8.4 Lubricating Oil Feed Rate − Adjustment
It is possible to adjust the lubricating oil feed rate in steps of 0.1 g/kWh. Use the
parameters in the columns Feed Rate and Adjustment for one cylinder, or for all
cylinders (see 4002−2, paragraph 3.9 Cylinder lubrication, CYL. LUBRICATION
page).
For more data about the adjustment of the lubricating oil feed rate, see 7218−3 Feed
Rate − Adjustment.
For data about the guide feed rates for running-in of new cylinder liners and piston
rings, see 0410−1 Running-in New Cylinder Liners and Piston Rings.
2015-03
Cylinder Lubrication
To Next Page
Loading...
