WinGD X72 - Page 281

Operation
4002−2/A1
Winterthur Gas & Diesel Ltd.
15/ 37
3.7.1 Procedure − Adjust the Diesel Fuel Injection Parameters
1) To adjust the diesel fuel injection parameters, turn the rotary button to move the
cursor to the related text field (see Fig. 8). Push the rotary button to enter the edit
mode.
2) Turn the rotary button to adjust the value (turn clockwise to increase, or
counterclockwise to decrease). Push the rotary button again to go out of the edit
mode.
Local Control Panel / Local Display Unit (LDU−20)
2015-03