WinGD X92 - Page 132

Maintenance1132−2/A2
Winterthur Gas & Diesel Ltd.
16/ 19
11) Attach the tool (94116A, Fig. 21) to the
bearing shell (1).
12) Attach the chain block (H2) the middle
of the lifting tool (94116A).
13) Operate the chain block (H2) and the
tool (94116A) to lift the bearing
shell (1).
14) Attach the engine room crane to the
lifting tool (94116A).
15) Remove the chain block (H2).
16) Operate the engine room crane to
move the bearing shell (1) on to a
wooden underlay.
2016
Main Bearing Removal and Installation
1
94116A
Fig. 21
H2
94116A
WCH03015