WinGD X92 - Page 448

Maintenance6606−1/A1
Winterthur Gas & Diesel Ltd.
2/ 8
2. Removal (SAC at Free End )
1) At the front of the SAC (4, Fig. 2) remove the four screws (1).
2) Remove the two rollers (2) from the SAC (4).
3) Remove the screws (6), then remove the flange (3).
4) Remove the collar (5)
5) Remove and discard the O-ring (7).
6) Remove the four clamps (9).
7) Remove the collar (10).
8) Remove the flange (8).
9) Remove and discard the O−ring (11).
10) Attach the two rollers (2) to the rear of the SAC (4).
I
7
6
3
5
8
9
II
2
4
2
Fig. 2
10
III
WCH02970
1
2
3
4
WCH02970
FRONT OF SAC
I
III
WCH02970
II
4
8
WCH02970
9
11
REAR OF SAC
WCH02970
2015
Scavenge Air Cooler: Removal and Installation