Maintenance
8752−1/A1
Winterthur Gas & Diesel Ltd.
5/ 10
8) Remove the four screws (1, Fig 7) from
the flange (2).
9) Carefully move the flange (2) away
from the connecting block (3).
10) Remove the four screws (2, Fig 8) from
the flange (1).
11) Carefully move the flange (1) up.
CAUTION
Injury Hazard: The weight
of the HP fuel pipe is
approximately 32 kg. Use
approved equipment or
sufficient personnel to lift
and move the HP fuel pipe.
12) Carefully remove the HP fuel pipe (3).
13) Apply protection to the sealing
faces (SF) to prevent damage and
contamination.
2015
HP Fuel Pipe: Removal and Installation
Fig. 7
WCH02957
I - I
1
SF
3
2
Fig. 8
1
2
3
1
SF
WCH02957
IV - IV
To Next Page
Loading...
