Maintenance8752−1/A1
Winterthur Gas & Diesel Ltd.
6/ 10
14) Remove the four screws (2, Fig. 9)
from the flange (3).
15) Carefully move the flange (3) up.
CAUTION
Injury Hazard: The weight
of the HP fuel pipe is
approximately 28 kg. Use
approved equipment or
sufficient personnel to lift
and move the HP fuel pipe.
16) Remove the four screws (6) from the
flange (5).
17) Carefully remove the HP fuel pipe (1).
18) Do a check of the sealing faces (SF) of
all te HP fuel pipes that you removed. If
you find damage, you must grind the
HP fuel pipes, refer to paragraph 3.
19) Apply protection to the sealing
faces (SF) to prevent damage and
contamination.
2015
HP Fuel Pipe: Removal and Installation
Fig. 9
1
WCH02957
III - III
2
3
SF
4
V
6
5
1
SF
To Next Page
Loading...
