Xerox B310

Action Yes No
Step 7
Replace the redrive. See Redrive
removal.
Does the problem remain?
Go to step 8. The problem is solved.
Step 8
Perform a print test.
Does the problem remain?
Contact the next level of support. The problem is solved.
SSeennssoorr ((FFuusseerr EExxiitt)):: SSttaattiicc JJaamm SSeerrvviiccee CChheecckk
Action Yes No
Step 1
Remove paper fragments and
partially fed paper.
Does the problem remain?
Go to step 2. The problem is solved.
Step 2
1 Enter the Diagnostics menu,
and then navigate to:
Printer diagnostics &
adjustments > Sensor tests
2 Find the sensor (fuser exit).
3 Make sure that the sensor
actuator freely moves and is
not stuck.
Does the sensor status change
while toggling the sensor?
Go to step 4. Go to step 3.
Step 3
1 Remove the right cover. See
Right cover removal.
2 Make sure that the JEXIT1
sensor cable is properly
connected to the controller
board.
Does the problem remain?
Go to step 4. The problem is solved.
Step 4
Perform a print test.
Does the problem remain?
Contact the next level of support. The problem is solved.
82
Xerox
®
B310 Printer
Service Manual
Diagnostics and Troubleshooting