Xerox DocuCentre SC2020

Tools
Xerox
®
DocuCentre
®
SC2020
User Guide
171
2-Sided Print
Purpose: To set the 2-sided printing for fax.
Values:
Remote Receive
Purpose: To receive a fax by pressing a remote receive code on the external telephone after picking up the
handset of the telephone.
Values:
Discard Size
Purpose: To set the device to discard images or any text at the bottom of a fax page when the entire page
does not fit the output paper.
Values:
Transmission Defaults
Purpose: To configure settings for transmitting fax.
Auto Redial Setup
Purpose: To configure settings for automatic redial.
Off Does not perform 2-sided printing.
On Performs 2-sided printing.
Off Does not receive a fax by pressing a remote receive
code on the external telephone.
On - Receives a fax by pressing a remote receive code on
the external telephone.
Remote Receive
Tone
Specifies the tone in two digits to start Remote
Receive.
Off Prints excess images or text at the bottom of a fax page without
discarding it.
On Discards any excess images or text.
Auto Reduction Automatically reduces a fax page to fit it onto the appropriate paper size.