Xerox DocuCentre SC2020

Environment Settings
Xerox
®
DocuCentre
®
SC2020
User Guide
34
2. In the [Admin Tools] tab, select [Start Printer Setup Utility for setting IP address] from the
Administration Tools, and then click [Start].
The Printer Setup Utility for Setting IP Address is started.
3. Ensure that the network cable is connected to the device, and then click [Next].
4. As a list of available IP addresses and Mac addresses appears, select the device and click [Next].
If you already have the IP address of the device, click [Enter IP Address] and directly enter the IP
address on the displayed window.