Environment Settings
Xerox
®
DocuCentre
®
SC2020
User Guide
35
5. Make advanced settings as needed, and then click [Next].
6. After confirming information displayed, click [Apply].
The specified settings are applied.
7. Click [Finish] to exit the Printer Setup Utility for Setting IP Address.
When the settings are properly configured, the device reboots automatically.
8. Confirm the assigned IP address after completing the setting process by one of the following
methods.
• For information on how to print the System Settings Report, refer to
Printing Reports/Lists on
page 232.
• For information on how to check on the About This MFP screen, refer to
Checking the Device IP
Address
on page 230.
• For information on how to check using CentreWare Internet Services, refer to the online Help of
CentreWare Internet Services.