Xerox PHASER 6121MFP - Page 285

Phaser 6121MFP Service Manual 6-23
Adjustments and Calibrations
Left Adj. (Front)
Function
Adjusts the left margin of media for single-sided printing.
Use
To correct a misaligned print image.
Tray 1: Adjust the left margin of media fed from tray 1 (manual tray).
Tray 2: Adjust the left margin of media fed from tray 2.
Adjustment Range
-15 to +15 mm, Step 0.21 mm.
Procedure
1. Select Left Adj. (Front) and press the OK button.
2. Select desired tray and press the OK button.
3. Select desired adjustment amount with the Up and Down Arrow buttons, and
then press the OK button.
Left Adj. (Back)
Function
Adjusts the left margin of media for double-sided printing.
Use
To correct a misaligned print image.
Tray 1: Adjust the left margin of duplex print media fed from tray 1 (manual tray).
Tray 2: Adjust the left margin of duplex print media fed from tray 2.
Adjustment Range
-15 to +15 mm, Step 0.21 mm.
Procedure
1. Select Left Adj. (Back) and press the OK button.
2. Select desired tray and press the OK button.
3. Select desired adjustment amount with the Up and Down Arrow buttons, and
then press the OK button.