A-12 Phaser 6121MFP Service Manual
Reference
Fax Default Setup Menu
The Fax Default Setup menu contains the following sub menus.
Sub Menu Settings
Auto Redial Setup
■ Attempts – Specifies the number of redial
attempts.
■ Every – Specifies the time between redial attempts.
Fax COMM Setup
■ Tone/Pulse – Specifies either a tone or a pulse for
the fax line. The default is “0” which is tone.
■ Line Monitor – Specifies the volume (Off, Low,
High) of the external phone (line monitor). Allows
you to hear the fax dialing and connecting.
■ PSTN/PBX – Specifies the type of circuit used by
the fax phone line, either PSTN (default) or PBX.
Select whether the connected telephone wiring is a
public switched telephone network (PSTN) or a
private branch exchange (PBX). For a PBX system,
the prefix number (outside line access number or
extension number) can be specified.
■ Reset to Default? – When selected, resets the Fax
COMM settings back to their original factory
defaults.
Device Setup
■ Country – Specifies the country where the printer is
located.
■ Date & Time – Specifies the current date and time
where the printer is located.
■ Date Format – Specifies date format:
MM/DD/YYYY, DD/MM/YYYY, or YYYY/MM/DD.
■ Device Fax Number – The printer’s fax number.
■ Sender’s Name – The name that prints on the fax
transmission report as the person who sent the fax.
Send Options Setup
■ Lighten/Darken
■ Quality Default
■ Send Mode
■ Header
■ Reset to Default?
For details, see “Fax Send Options Setup Menu” on
page A-13.
Receive Options Setup
■ Memory Receive
■ Number of Rings
■ Scale to Fit
■ Receive Print
■ Receive Mode:
■ Forward
■ Footer
■ Select Tray
■ Reset to Default?
For details, see “Fax Receive Options Setup Menu” on
page A-13.
Fax Report Setup
■ Activity Report – Provides information about
completed fax jobs.
■ Send Report – Provides information about fax jobs
sent.
■ Receive Report – Provides information about
received faxes.
To Next Page
Loading...
