Phaser 6121MFP Service Manual A-13
Reference
Fax Send Options Setup Menu
Fax Receive Options Setup Menu
Menu Item Description
Lighten/Darken Specifies the density level of the image or text.
Quality Default Specifies the resolution of the scanned image being
faxed:
■ Standard/Text – For documents containing large or
easy-to-read text.
■ Fine/Text – For documents containing text that
needs higher resolution, such as small print or
handwritten text.
■ SuperFine/Text – For text that needs the highest
resolution, or detailed illustrations (not photos).
■ Standard/Photo – For documents containing
standard photos.
■ Fine/Photo – For photos needing higher resolution.
■ Super Fine/Photo – For photos needing the highest
resolution.
Send Mode
■ Scan then Dial (default) – The printer scans the
documents and then transmits the fax.
■ Dial then Scan – The printer dials and connects to
the destination before scanning the documents to
fax.
Header
■ On – Sender information is included in the fax
transmission: date and time, transmitter’s name
and fax number, session number, page number,
and total page number.
■ Off – Sender transmission information is not
printed.
Reset to Default? When selected, resets all Send options to their
original factory defaults.
Menu Item Description
Memory Receive
■ On – Faxed data is stored in memory instead of
being printed when received.
■ Off (default) – Faxes are printed at the time they
are received.
Number of Rings Specifies the number of rings (from 1 to 16) allowed
before the printer connects to an incoming fax.
Scale to Fit Used when the image being received is larger than
the printable area of the paper.
■ On – The information is reduced to fit the page.
■ Off – The information is divided into the number of
pages it takes to print it.
■ Crop – The information that is outside the
printable area of the page is not included in the fax
printout.
To Next Page
Loading...
