Xerox Phaser 7760

January 2010
4-28
Phaser 7760 Color Laser Printer
REP 7.15, REP 7.16
Revised
Repairs and Adjustments
REP 7.15 Tray 5 (3TM)
Parts List on PL 16.1
Removal
1. Pull out Tray 5.
2. Lift the end of the Tray 5 to disengage the lock on the rail (not visible) and remove Tray 5.
REP 7.16 Tray 3 Feeder (3TM)
Parts List on PL 16.6
Removal
1. Pull out Tray 3.
2. Remove the Left Lower Cover (REP 14.12).
3. Removing Tray 3 Feeder (Figure 1).
a. Loosen 1 screw holding the Bracket.
b. Release the wiring harness from the Clamp and disconnect the P/J.
c. Remove the 2 screws and Tray 3 Feeder.
Figure 1 Removing Tray 3 Feeder