Xerox Phaser 7760 Service Manual

January 2010
4-32
Phaser 7760 Color Laser Printer
REP 8.1, REP 8.2
Revised
Repairs and Adjustments
Replacement
NOTE: Install the Left Cover Assembly on the hinge pins, manually align marks on the Motion
Damper before completing the installation (Figure 3). Failure to align the gears can result in
binding and gear damage.
CAUTION
Before closing the Left Cover Assembly to connect the harness, hold up the black plastic
Duplex Baffle while closing transport.
Figure 3 Aligning Marks on Motion Damper
REP 8.2 Duplex Chute
Parts List on PL 2.8
Removal
1. Remove Tray 1 (MPT) (REP 7.1).
2. Open the Left-Hand Door A to allow the Duplex Chute to swing down.
3. Removing the Duplex Chute.
a. Rotate the Duplex Chute downward until the keyed pivot shaft can be removed from
the Pivot Bracket.
b. Remove the Duplex Chute.
Figure 1 Removing Duplex Chute

Xerox Phaser 7760 Specifications

General

Brand	Xerox
Model	Phaser 7760
Category	Printer
Language	English