Xerox Phaser 7760

January 2010
4-77
Phaser 7760 Color Laser Printer
REP 12.56, REP 12.57
Repairs and Adjustments
Revised
REP 12.56 Professional Finisher Booklet Stapler
Parts List on PL 21.16
Removal
1. If the Booklet Maker Unit has been removed from the Finisher (REP 12.55), go to step
step 4.
2. Open the Front Door.
3. Pull out the Booklet Maker Unit.
4. Removing the Booklet Stapler (Figure 1).
a. Pull out the Booklet Stapler.
b. Remove the 2 screws on the left Rail.
c. Push in the Stopper on the right Rail.
d. Remove the Booklet Stapler.
Figure 1 Removing the Booklet Stapler
REP 12.57 Finisher Compiler Tray
Parts List on PL 21.8
Removal
1. Remove the Rear Upper Cover (REP 12.41).
2. Remove the Front Door (REP 12.40).
NOTE: Ensure to use a stubby screwdriver for the next step.
3. Remove 1 screw securing the Compiler Tray (Figure 1).
Figure 1 Removing Screw Securing the Compiler Tray
4. Remove the Stapler Assembly (REP 12.53).
5. Remove the Inner Cover (REP 12.48).