January 2010
4-109
Phaser 7760 Color Laser Printer
ADJ 9.17, ADJ 9.18
Repairs and Adjustments
Revised
ADJ 9.17 Calibrate Colors
Purpose
Calibrate for Colors is used for adjusting the printer for optimal color output. Color settings may
need adjustment upon initial printer setup or when toners and Imaging Units are replaced.
Procedure
NOTE: Ensure to load 8 x 11 media (LEF) in Tray 1 (MPT) to perform this procedure.
1. Go to the Printer Menu. Scroll down the menu to find Troubleshooting and press OK.
2. Select Print Quality Problems and press OK.
3. Scroll down the menu to find Calibrate Colors and press OK.
4. Select Tutorial Page and press OK.
5. The printer prints 2 Color Calibration Tutorial pages.
6. Follow the instructions on the Color Calibration Tutorial pages to perform the procedure.
ADJ 9.18 Calibrate Margins
Purpose
Calibrate Margins is used for adjusting the printed area to fit within the edges of the paper.
• Margin adjustments for Trays 2-5 affect all of the lower trays and only need to be per-
formed once.
• Margin adjustment for Tray 1 (MPT) affect only affect Tray 1.
Procedure
NOTE: Ensure to load 8 x 11 media (LEF) in Tray 1 (MPT) to perform this procedure.
1. Go to the Printer Menu. Scroll down the menu to find Troubleshooting and press OK.
2. Select Print Quality Problems and press OK.
3. Scroll down the menu to find Calibrate Margins and press OK.
4. Select Calibrate Margins Page and press OK.
5. Select the appropriate Tray to be calibrated (i.e., Tray 1, 2, 3, 4, or 5) and press OK.
6. The printer prints 2 pages of the selected Tray Calibrate Margins.
7. Follow the instructions on the Calibrate Margins pages to perform the procedure.
To Next Page
Loading...
Need help?
General