Xerox Versant 80 Press - Page 12

Replacing the Bypass Tray Feed Rolls for the OHCF (Trays 8 and
9)......................................................................................................................18-3
Replacing the OHCF Feed Rolls for the OHCF (Trays 8 and
9)......................................................................................................................18-4
OHCF (Trays 8 and 9) Problem Solving....................................................................18-8
Fault Codes - Oversized High Capacity Feeder (Trays 8 and
9)......................................................................................................................18-8
OHCF (Trays 8 and 9) Jam Clearance.......................................................18-10
Clearing OHCF (Trays 8 / 9) Jams.................................................18-10
Paper Jams When the Bypass is Installed on Trays 8 and
9........................................................................................................18-10
Paper Jams Inside the OHCF (Trays 8 and 9)...........................18-12
OHCF (Trays 8 and 9) Paper Jams at Lever 1a and Knob
1c......................................................................................................18-12
OHCF (Trays 8 and 9) Paper Jams at Lever 1b and Knob
1c......................................................................................................18-13
OHCF (Trays 8 and 9) Paper Jams at Lever 1d and Knob
1c......................................................................................................18-14
19 Business Ready (BR) Finisher and Optional Booklet
Maker......................................................................................................19-1
Business Ready (BR) Finisher Overview....................................................................19-1
Identifying the BR Finisher Components................................................................19-2
BR Finisher Maintenance...............................................................................................19-2
Consumable Supplies for the BR Finisher...................................................19-2
Replacing Staples in the Main Stapler Unit...............................................19-3
Replacing Staples in the Booklet Maker.....................................................19-3
Emptying the Hole Punch Waste Container..............................................19-4
Problem Solving for the BR Finisher...........................................................................19-5
Fault Codes - Business Ready (BR) Finisher and Optional Booklet
Maker..............................................................................................................19-5
Clearing Jams in the BR Finisher at Position 3a......................................19-6
Clearing Jams in the BR Finisher at Position 3c.......................................19-7
Clearing Jams in the BR Finisher at Position 3d......................................19-8
Clearing Jams in the BR Finisher at Position 4.........................................19-8
Clearing Jams in the Booklet Tray.................................................................19-9
BR Finisher Specifications...........................................................................................19-10
20 Interface Module / Interface Cooling Module.........................20-1
Overview of the Interface Module / Interface Cooling Module......................20-1
Module Overview...............................................................................................................20-2
Module Control Panel.........................................................................................20-2
Paper Path through the Module....................................................................20-3
Paper Curl Settings on the Module...............................................................20-3
Xerox
®
Versant
®
80 Pressx
User Guide
Table of Contents