Xerox Versant 80 Press - Paper Jams in Trays 1-3

9. Pull down Handle 2f and remove the jammed paper.
10. Return Handle 2f to its original position.
11. Push in the transfer module completely and rotate Handle 2 to the left.
12. Close the pree Front Door.
13. Run five blank sheets to clean left-over toner from the fuser roll and resume the
copying/printing process.
Paper Jams in Trays 1-3
Note
Paper is sometimes torn and remains inside the press if you open a tray without checking
the paper jam position. This may cause a malfunction. Check where the paper jam
occurred before clearing the problem.
1. Open the tray where the paper jam occurred.
2. Remove the jammed paper.
3. Push the tray in gently until it comes to a stop.
14-41Xerox
®
Versant
®
80 Press
User Guide
Press Problem Solving