Xerox Versant 80 Press - Clearing E1; E2 Jams

Clearing E1 / E2 Jams
Use the following procedure to clear jams when the E1 and / or E2 LED is lit on the
SquareFold Trimmer Module control panel.
1. Make sure that the machine is not in operation, and press the button on the left cover
of the Trimmer unit to open the cover.
2. Remove the jammed paper.
3. If you cannot remove the paper in Step 2, open the right cover of the finisher.
4. Turn the knob 4a to the right, and then remove the jammed paper.
5. Close the left cover of the Trimmer unit.
6. If you opened the right cover of the finisher in Step 3, close the cover.
25-13Xerox
®
Versant
®
80 Press
User Guide
SquareFold Trimmer Module