Emptying the Punch Waste Container
The screen displays a message indicating when it is time to empty the Punch Waste
Container.
Caution
Only remove the Punch Waste Container while the system is powered ON. If you switch
off the power when emptying the container, the press cannot detect that the container
was emptied.
1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.
3. Pull the container out of the finisher (R4).
4. Discard all the punch scraps in an appropriate container.
5. Reinsert the empty container into the machine.
6. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
Xerox
®
Versant
®
80 Press24-10
User Guide
Standard Finisher / Booklet Maker Finisher
To Next Page
Loading...
