2. Open the finisher left cover.
3. Move lever 1a downward and turn knob 1c left. Remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
4. Return lever 1a to the original position.
5. Close the finisher left cover completely.
Note
The machine will not operate if the cover is open even slightly.
Paper Jams at Lever 1d
1. Make sure that the machine has stopped printing.
2. Open the finisher left cover.
Xerox
®
Versant
®
80 Press24-16
User Guide
Standard Finisher / Booklet Maker Finisher
To Next Page
Loading...
